r/3Dprinting 9d ago Got the W 1 Silver 7 Helpful 7 Take My Money 1 Masterpiece 1 Wholesome 4 All-Seeing Upvote 1 Wholesome (Pro) 1 Bravo! 1

Of everything I've designed and 3d printed, this simple toy still wins.

Enable HLS to view with audio, or disable this notification

44.4k Upvotes

1.3k

u/seattleJJFish 9d ago

Love this! I needed this when I was 12. I’m 50 and I still need it

525

u/psalm723 9d ago

44 here and have been a long time window surfer. I was driving home from paddleboarding with my boards on top of the car and window surfing with just my hand (no board at the time). That's when the idea hit me.

161

u/Jaytr0n 9d ago Wholesome Masterpiece

older now too, but we used to business card window surf. grab a stack from remax and bam

learned from the best

37

u/tintooth66 9d ago

Thank you for that! I've never seen that and I greatly enjoyed it.

17

u/mancheese 9d ago

Agreed. I have never seen this and I greatly enjoyed it. Such quality.

16

u/Lakus 8d ago

Are you a man or just a bunch of business card looking like a man?

I want this to be a real movie.

8

u/KrombopulosDelphiki 9d ago

Damn that made me laugh way harder than it should have. Awesome "trailer"

8

u/DopeBoogie 9d ago

I'm disappointed this isn't a full-length movie I can watch

→ More replies

4

u/sherminnater 9d ago edited 7d ago

Man I was really hoping somebody would post this gem. The post instantly brought this back to my memory, haven't watched or thought about this video in years!!

2

u/AvoidMySnipes 9d ago

Wtf lmao 😂😂😂 is this an actual movie, and is it a good one to watch?

6

u/cleetus76 9d ago

High, how are you?

→ More replies
→ More replies

86

u/j00022 9d ago

Smooth hands for 44!

116

u/psalm723 9d ago

Ha--my son's the surfer in the video. It would have been me but he's too young to drive.

33

u/Iredditfromwork 9d ago

Haha. I was gonna say you have the hands of a 13 year old

37

u/______DEADPOOL______ 9d ago

Plot twist: son was 3D printed, OP was talking about hand, not mini hoverboard.

→ More replies

2

u/neonwhizstream 7d ago

pickled in alcohol in a jar in a closet

→ More replies
→ More replies

6

u/OopsOverbombing 9d ago

Now when I used my hand I always pretended it was like an f16 or some fighter jet. We just need a sort of glove that looks like a plane for this.

14

u/neolologist 9d ago

Instead of 'Hang Ten' do you... 'Hang Nail'?

I'll see myself out.

→ More replies

33

u/devilwarriors 9d ago

I'm 36 and going on a vacation with my parents and I would love to print this but I can't for the same reason I couldn't when I was a kid. My dad will lose his shit if we open the windows by even an inch and he loses even just 0.00001 MPG :(

14

u/Diviner_Sage 9d ago

It's been proven that driving with the windows up with air conditioner on is more fuel efficient with the air off even better. But open up 2 windows one front one back on opposite sides is just as good. And it's less strain on the engine.

8

u/haagimus 9d ago

I'm 39 and I was doing the hand only version of this earlier today in my truck 👍🏻 been doing this my whole life as long as I can remember. I definitely need to print one of these!

2

u/Futternut 8d ago

We all do brother

2

u/trimbandit 8d ago

I'm 50 and my daughter gave me one for Christmas last year. I love it. Wapaaaah!

→ More replies

661

u/but-first----coffee 9d ago

Saved! Looks wicked.

136

u/Kind-Leadership3334 9d ago

I definitely need the stl. For this!

135

u/[deleted] 9d ago Wholesome Seal of Approval

[removed] — view removed comment

57

u/crunchypuddle 9d ago

jfc don't buy this from someone.

These finger surfboards are a dime a dozen right now and the print is insanely easy to find for free.

Here saved you some money

→ More replies

21

u/el_smurfo 9d ago

What does thermoforming entail? You can't just print it?

127

u/psalm723 9d ago

The board is going to print flat. You'll also print a rounded mold that you will use to give the board its curved shape. Once the board is printed. You'll heat it up with hot water and form it to the mold. It's simple to do.

I use this technique because you can get a slight curve in the board while maintaining its strength (no short print lines in the length of the board). It also allows the board to print with no support material so it has a smooth surface.

42

u/sage-longhorn 9d ago

I've been meaning to play with non-planar slicing to directly print strong rounded parts. This might be a fun model to experiment with

24

u/rtkwe 9d ago

You should sell/provide a 3D file of the final shape too for people with resin printers.

2

u/digitalasagna 9d ago

If he only ever did it this way, then he likely never even made a model of the rounded shape.

12

u/touchmyfuckingcoffee 9d ago

I don't have a 3d printer. Can I just buy one of these boards from you?

5

u/zachsmthsn 9d ago

1

u/StrangeBedfellows 8d ago

But the same thing. I understand the intent but... Not

→ More replies

0

u/officalSHEB 9d ago

[Windeck! I have one it's super fun!](www.windecktoy.com)

12

u/jarfil Ender 3v2 9d ago

Just 3D printing wouldn't make a smooth surface. You'd have to either print the shape and sand it, or print it flat (smooth surface) and thermoform it into the final shape. I guess the latter makes more sense in this case.

20

u/shredtilldeth 9d ago

Major hardware on YouTube did a test with 3d printed fans. The stepping really doesn't affect the results, so I think this would be fine if it was printed in its final configuration.

2

u/eat-more-bookses 9d ago

Agree; I don't think smoothness matters much at this scale and those wind speeds... Hence the foam board planes with wacky stepped airfoils

1

u/techslice87 9d ago

Did? Fan showdown is still going strong!

2

u/shredtilldeth 9d ago

Oh I know, I still watch it. What I meant was he once did a test specifically to determine whether the stair stepping of a 3d print affected the airflow compared to a manufactured, smooth blade. It did not. That test he only did once.

→ More replies

8

u/el_smurfo 9d ago

Ah, so print a surfboard shape and bend with hands after heating with heatgun. Seems pretty basic.

5

u/Jrowe47 9d ago

Smoothing can be tough. A resin printer would do just fine. You can also vapor smooth abs or use other solvents for different plastics. Last and most difficult is having a good printer, a good slicer, and just the right settings dialed in, after years of dedicated practice and experience.

Resin printers are pretty much plug and play - get the ventilation and safety gear right and you're golden.

3

u/jarfil Ender 3v2 9d ago

I feel like printing a base shape and thermoforming it onto a mold, is quicker and easier than the whole resin process. But then again, just yesterday I've been thinking of using the heat gun to make fries, so dunno... kind of feels like a hammer when it comes to plastic 🤷

1

u/Jrowe47 9d ago

Heck, I almost want to hand carve one of these air-boards from some exotic wood.

It'd be neat to make a mini air-tunnel for this, maybe train a rat to air-surf... 3d print little goggles and a helmet for safety, of course.

→ More replies
→ More replies

5

u/rockstar504 9d ago

Idk what hes talking about its not a complicated design I'll just make my own lol

2

u/el_smurfo 9d ago

Stl below for similar.

2

u/Childhood-These 9d ago

Exactly lmao

4

u/Canna-dian 9d ago

And save a whole $6.

It comes down to what you think your time is worth

7

u/rockstar504 9d ago edited 9d ago

It comes down to how much a dollar is worth to you

edit: why you mad though? bc I'd rather have a 6 pack and design my own flat oval with a half circle on it?

→ More replies

27

u/Annies_Boobs 9d ago

Is anyone not seeing the blatant advertising this post and his reply is? I mean OPs account is literally 2 days old.

7

u/RememberToRelax 8d ago

It's weird how anti-advertising reddit is.

On like any other social network if you said I made a thing you can pay me for it if you want people would generally be cool with it or even shock buy the thing if they want it.

Honestly, reddit trained people to advertise like this because being honest gets a worse reaction.

3

u/Ask_Are_You_Okay 8d ago

The answer is obvious: redditors don't have money.

How many times have you seen someone say "If I could afford gold" or whatever... People can't even spare $2.

2

u/Annies_Boobs 8d ago

Ok but reddit isn’t any other social network. We are built upon our communities and the organic engagement with each other.

Reddit has a built in platform specifically made for advertisers, and they should use it if they want to try and make money on their product.

If these communities and their moderators weren’t so strict when it comes to this stuff then your Home feed would be nothing but inorganic posts of people trying to syphon more money out of you.

Reddit is not the only social media with these rules either. I’m in quite a few Facebook groups because it’s the one good feature the website has, and this rule is quite common, especially in the 3D printing groups. Otherwise the exact thing happens that I talked about above.

→ More replies
→ More replies

18

u/Old-Ad-9246 9d ago

Thanks so much! That’s amazing!

6

u/pc42493 9d ago

Yes, thank you SO SO MUCH. Oh my god, the generosity! I totally echo the very authentic sentiments expressed by this account that is totally unconnected to OP.

3

u/Kerzizi 9d ago

I'd love the file too but the post was deleted. Where can I find it?

3

u/Old-Ad-9246 9d ago

Oh it looks like it was deleted! I wasn’t even able to pull it up yet

14

u/Shit_Sipper_007 9d ago

he was here with a new account trying to sell the files for $4.50 for something that takes 5 min to draw up. I would draw it and give it for free but I have no interest in printing one. found this one instead for those that do

https://www.thingiverse.com/thing:5028999

2

u/Old-Ad-9246 9d ago

Yeah also I just checked this guys account is only 2 days old

→ More replies

2

u/boyden 9d ago

How kind is that!

1

u/MadMardig3n 9d ago

Dude so awesome, going to buy now!

-5

u/Im_a_cunt 9d ago

What a cunt, just give it away ya prick.

2

u/pedrohck 9d ago

Fuck off, he should sell his work.

→ More replies
→ More replies
→ More replies

2

u/LowlySysadmin 9d ago

Off-topic, but as a 41yo I'm so glad "wicked" is still a thing. I remember being mocked by my parents for saying it as a kid - who's laughing now? That one stood the test of time.

→ More replies
→ More replies

166

u/SourceWebMD 9d ago

Those look like Utah mountains

73

u/psalm723 9d ago

Correct.

16

u/NBABUCKS1 9d ago edited 9d ago

going with sw weber county/nw davis county.

right canyon is weber canyon and left canyon is ogden canyon. with snowbasin gnar in the middle.

perhaps from that tomato city that shall not be named.

17

u/MikeOxbigg 9d ago

What's your rank on Geo Guessr?

10

u/NBABUCKS1 9d ago

lmao i live like 10 miles away just below the middle of the middle section of mountains and my buddy lives like 3 blocks away on that street i'm pretty sure. :)

6

u/Pantaz1 9d ago

The Wasatch mountains have a very distinguished silhouette. I can spot them in videos easily. Helps I have lived here my entire life

→ More replies

3

u/timkyoung 9d ago

I was thinking the same thing.

→ More replies

46

u/FlexMeta 9d ago

You winn’d.

42

u/timkyoung 9d ago

Kit Cloudkicker would be proud.

6

u/funtsunami 9d ago

Came to the comments for this. I haven't thought about Kit in forever.

10

u/IWantAnE55AMG 9d ago

Loved Tail Spin.

6

u/pm_ur_whispering_I 9d ago

Ohhhheeeeuuuuuu tail spin!

7

u/GarbageWater12 9d ago

Ohhhhweeohhh! Talespin!

→ More replies

25

u/throwaway3544219 9d ago

That won't work on water!

Unless you've got POWER!

3

u/roy20050 9d ago

Didn't expect back to the Future reference.

2

u/stormhunter2 8d ago

I didn’t either, but I’m glad they made it

2

u/SparkitoBurrito 9d ago

Great Scott!

2

u/assburgers-unite 8d ago

McFly you BOJO

28

u/giantiota 9d ago Helpful

Airboarders for life

https://youtu.be/mwONzG0uZg0

6

u/AmateurFootjobs 9d ago

Fuck I was about to post this lol

"I wanna pay you 25 dollars"

"...can you repeat that???"

2

u/brock2607 9d ago

I miss the Bath Boys…

→ More replies
→ More replies

18

u/yorkshireman_92 9d ago

Ever seen the film hereditary? Keep them arms in the car boy.

5

u/Terrible_Truth 9d ago

I haven't seen that movie but IRL a kid was dangling a jump rope or something out the window with it tied to their wrist. The rope caught the axel and ripped their hand off. I think it was reattached.

This certainly isn't long enough but it's what I thought first.

0

u/Scary-Peace6087 9d ago

Hitting your hand on a pole would have vastly different results than your damn head

6

u/garifunu 9d ago

Still might have serious injuries when your arm bends the wrong way

→ More replies

53

u/okaaaayyyyy 9d ago

I designed and printed this yesterday too!! I saw it on tiktok and I had to try it!

76

u/Dryfiredude 9d ago

Wanna share yours since OP is using this as an ad to sell his? Hahaha

15

u/okaaaayyyyy 9d ago

2

u/SpaceCadetMoonMan 9d ago

You have my taste in board style, I love it

2

u/okaaaayyyyy 9d ago

Paint didn't stick to it that well though

3

u/Heratiki 9d ago

Probably should hit it with primer first then paint or use a priming paint or just sand the crap out of it first then paint. It doesn’t want to stick well because it’s generally a smooth exterior to the plastic.

2

u/okaaaayyyyy 9d ago

Thanks a lot!!

4

u/Th3Element05 9d ago

I get "filler and sandable" primer, it fills in the layer lines and then sands smooth, optionally give it a second light coat of the primer, and paint it.

2

u/okaaaayyyyy 9d ago

Thanks! Sanding without a primer is not going to work?

2

u/Heratiki 8d ago

It’s still plastic so it’s still going to not want paint (or anything really) sticking to it and primer eliminates that. Or you can get a paint that’s both primer and paint together. If you’re using acrylics then just do 3-4 coats drying in between.

2

u/Th3Element05 7d ago

Sanding without primer works great, and you can get a great finish if you sand down to 800 grit or higher, but it's a ton more work to sand away the layer lines that way. Sanded away the layer lines, then sanded with increasingly fine grits up to 800.
I can never get a picture to do that finish justice, it's beautiful and I love finishing pieces that way when I can.

But if you're painting something, it's much faster and easier to use a primer to fill in the layer lines and then sand that smooth. I have had great results with this stuff. Filler & Sandable Primer

2

u/wizzahd 9d ago

i thought that was intentional! looks great like that :)

→ More replies
→ More replies

59

u/stimilon 9d ago Helpful

Reminds me Of my favorite commercial: https://youtu.be/IXw17Cjbeeo

8

u/WarpedKings 9d ago

That was really cool! Thanks for sharing

5

u/CopperWaffles 9d ago

Well, wow. That was the coolest thing I’ve watched in a while. Really brings me back to the 3 hour ( yes, 3) bus rides to and from school. I was into snowboarding and had some tech decks, I used them exactly like this.

Thanks for sharing.

→ More replies

5

u/NamityName 9d ago

What an excellent video to The Avalanches song Because I'm Me. I liked that they worked in the song's use of sounding like it was being recorded from far away at times.

→ More replies

2

u/triplehelix_ 9d ago

this is the commercial that put me onto the avalanches.

→ More replies

11

u/[deleted] 9d ago edited 3d ago

[deleted]

6

u/sammybola 9d ago

I was just thinking this would be a really fun wood carving project.

10

u/LePouletPourpre 9d ago

True story.

I medevaced a girl from Lake Tahoe who stuck her arm outside her car window and had it torn off by a truck coming from the opposite direction.

→ More replies

22

u/Vendivorex 9d ago

Treasure planet vibes

6

u/Wizard_Hatz 9d ago

That Titan ae/treasure planet combo pizza night was the shit.

2

u/[deleted] 9d ago edited 6d ago

[deleted]

→ More replies
→ More replies

14

u/R4G3JCD 9d ago

Aaaand I lost the arm

2

u/DidNotPassTuringTest 9d ago

Tis but a scratch

→ More replies

3

u/Clintcar 9d ago

Decades of 3D printing and the thing that gets used on a daily basis? My simple rattleback.

12

u/rambostabana 9d ago

So nice! Please share the file

20

u/mkosmo 9d ago

OP is selling it... go figure.

3

u/[deleted] 9d ago

[deleted]

39

u/mkosmo 9d ago

This whole post is just an ad. Given that the account has 3 posts and 2 of them are this exact one (last one a couple of days ago), it's spam violating that 10% rule.

4

u/Lasekk- 9d ago

Also this wasn't his idea. There's a few files for this exact same thing. One is a ring instead of a bracelet if I remember it correctly.

32

u/BT_2021 9d ago

Oh no! They are selling something they made D:

26

u/CopperWaffles 9d ago edited 9d ago

Seriously. And someone actually downvoted you for saying this.

It’s $4.50. If you (Not you specifically, but basically most people in this sub) can’t afford to support the creator, then just put in the hours to learn how to model. This sub is full of freeloading leaches that contribute nothing to the community and expect everyone’s work for free and then bitch and beg when it costs less than a burrito supreme.

Imagine being that person that is too lazy to learn modeling and then complaining that the people that put in the time to learn and share their content aren’t giving their work away for free.

I get it, it’s cool when people post their files for free but this entitled bullshit needs to stop.

20

u/ShallowJam 9d ago

Have a look at the account. This post is clearly just an ad and I think that's what gets people upset. It's an ad charading as a genuine community post.

→ More replies

8

u/grokthis1111 9d ago

"It's perfectly fine to be a redditor with a website, it's not okay to be a website with a reddit account."

13

u/BT_2021 9d ago

The kicker is modelling isn't even that hard to learn! The biggest investment is time.

I haven't printed my own models yet (just got a printer) but I'm pretty confident with the skills I already have from only a month or two of learning blender that I can make my own stuff for print in relatively no time at all.

To be fair I was being a bit of a sarcastic twat in my original reply so if I got downvoted for that I don't blame the person.

4

u/Stwarlord 9d ago

for me it's more that it feels like a blatant ad, and that OP is acting like this is some original idea he came up with and hasn't been around forever.

not to mention the amount of upvotes on the post compared to what's in the comments... ~20K positive karma but not a single comment is above 500 karma and only like 400 comments total. seems like it was pushed to the top with bot upvotes to get the most for ad space

→ More replies

2

u/rwwrou 8d ago

might actually set himself up to be sued as im pretty sure this is patented, no matter how silly that sounds.

one of the first kickstarters was this exact thing and i believe they mentioned having a patent.

2

u/Arbiturrrr 8d ago

Lmao for such a simple model

3

u/myoutofstyle88 9d ago

How dare they! I’m going to my local pizza joint and going to stomp my feet and say ‘go figure’ if they ask me for money to have some pizza they’re flaunting.

6

u/Shiral446 3DPrintLog.com Developer - Hoffman Engineering 9d ago

That is genius. Instantly brings me back to childhood roadtrips.

5

u/mrDerptAstic 9d ago

Uhm I don't have a 3d printer but I want one!!! Do you offer printing them?

8

u/psalm723 9d ago

Sorry--I don't. But check out 3D hubs or shapeways and get it printed in PLA or ABS. Or, better yet, have a neighbor kid print you one and print one for himself. As payment, give him the file.

2

u/mrDerptAstic 9d ago

You gonna make me buy a 3d printer anyways, it's been on the list for a while, this might be the camel that broke that straw. :D

2

u/Ackables 9d ago

You can buy them on Amazon too if you want. But still getting a 3d printer would be pretty sweet.

2

u/Cerfect_Pircle 9d ago

I’ll print it for you if you pay for the shipping partner

5

u/Morawka 9d ago

Very low key way to advertise your product on Reddit. Just download any surfboard stl and scale it down. Drill a small hole for the string. Boom, free

2

u/atticus2132000 9d ago

That's amazing. Road trips in the 80s would have been so much better with one of those.

2

u/CthuluTheGrand 9d ago

"Prosthesis makers love him!"

2

u/Educational_Pay1567 9d ago

Hope you can 3d print a hand.

2

u/Aeolian_Leaf 9d ago

PSA for the Australians thinking "that's cool, I need one" - it's illegal to travel with any part of your body protruding out the vehicle. Yes, this includes sticking your hand out like this.

Will you get booked? That's up to the mood of the local police / highway patrol. I've been "warned" for the classic elbow resting on the window edge and fingers on the top of the door / roof before.

Go nuts, just be aware that you may cop a fine if they're having a bad day.

2

u/canadatrasher 9d ago

It's not just that it's illegal, it's super dangerous.

→ More replies

2

u/MussoliniLinguini 9d ago

Ah are you the annoying fucker I see all over Facebook marketplace? Your description is cringe as fuck.

2

u/headlightbrick 9d ago

Your next project will be a prosthetic arm

2

u/Deathnfear 9d ago

Proceeds to crash car.

2

u/Rebel_charlieb303 9d ago

I always tell people as a GA pilot, the air is very closely related to water when it comes to fluid dynamics. What a simple but awesome representation of this!! Thanks for the awesome video!!

2

u/armybiomedtech 9d ago

Simple things for simple minds...

2

u/TanNaked2019 9d ago

Down vote 👎🏼

2

u/GamerCirca80 8d ago

I’ve been doing this my whole life. I thought I was alone and crazy and weird. This is my whole childhood, riding in the backseat, from California to Arkansas on route 40 to visit my dad’s side of the family. Wow. Very cool.

2

u/KlutzyFriendship574 8d ago

I NEED THE STL

2

u/mantafloppy 8d ago

OP is selling his for 5$, but i made this one free if your interested : https://www.printables.com/model/254507-finger-surfboard-wind-toy

→ More replies

2

u/Spazmanaut 8d ago

Someone’s losing an arm

2

u/TruthYouWontLike 8d ago

It's all fun and games until it gets snagged around a tree and rips your wrist off.

2

u/Shaper_pmp 8d ago edited 8d ago

Awesome idea, but I seem to remember my parents of thirty years ago reliably informing me this was a great way to have a lamp-post or truck snap your arm off. 😆

2

u/mars935 8d ago

Isn't this kinda dangerous?

2

u/whatsnooIII 8d ago

You'd make a fortune selling these. And receive some lawsuits

2

u/dimplesofcon 8d ago

Police: Sir can you please explain why you crashed your car into that bus.

Me: well I got a 3D printer last week......

2

u/sjgittins 8d ago

Is a STL file for this posted somewhere?

→ More replies

2

u/Interesting-Dog-1224 8d ago

What an amazing invention and cool toy.

I'm stealing it, mass producing it and selling it all over the world.

2

u/NoNewTricks 8d ago

Patent that fucker and make millions. They'll be sold to parents of bored kids on road trips.

2

u/remberthealemo 8d ago

But can you do a Cut Back Drop Turn?

2

u/Cambronian717 8d ago

Oh my god. Leave it to redditors to take a fun and light hearted post and make it a guaranteed death sentence. You put your arm out your car window once and this thread would make you think it’s a 100% loss rate.

4

u/TruekaerF 9d ago

Please share the model.

2

u/SpaceShark01 9d ago

They’re selling it.

2

u/wallsemt 9d ago

Someone else posted it above!

→ More replies

7

u/Velho 9d ago

Dont you think that it is bit dangerous to play AND film while you drive?

Btw stl?

30

u/psalm723 9d ago

Ha yes. My son is the surfer in the video and my wife was driving. Don't drive, window surf, and film at the same time. I am guilty of driving and window surfer at the same time whether I have a board or not.

3

u/Velho 9d ago

He did fantastic job to demo your print. Wish I would sometimes be a passenger, I drive like 99% when we go anywhere.

2

u/El_Dief 9d ago

Person in video appears to be in the back seat....

→ More replies

1

u/Popcorn57252 9d ago

It's pretty clearly outside the window, so how do you get it to stick to your fingers?

7

u/psalm723 9d ago

I use surfboard wax--seriously. It works without--just the pressure of the wind holds it to your fingers. But if you have some surfboard wax, I'd recommend that. Plus--the cool factor of waxing your surfboard.

I've given these to nieces and nephews as gifts and use a chocolate mold and melt surfboard wax into it so they get a mini bar of board wax with their board.

FYI - I found optimal speed is 30 - 40 mph.

→ More replies
→ More replies

2

u/SnagglToothCrzyBrain 9d ago

Wait, those have been around forever. They're handed out as cheap corporate gifts and stuff. Did you really "design" this, or download a template, tweak a corner, and post it for karma?

3

u/GrievesODJ 5d ago

Literally

1

u/jonnyoextemo 9d ago

I need one. I will how to cad just you make it myself.

1

u/zackowen23 9d ago

Shut up and take my money!

1

u/Usterall 9d ago

next project: 3D printing a new left hand.

1

u/canadatrasher 9d ago

Don't stick your hands out of the window when driving.

Jesus christ. Basic safety.

1

u/DarkYaeus 9d ago edited 8d ago

So nice but I feel like it is pretty very dangerous. I can not see it being safe when used while driving on a road, maybe with a fan or something like that?

edit: It is amazing tho, and probably is very fun.

→ More replies

1

u/Redd_Baby 9d ago

The first 30 prototypes can be found in the Pacific garbage patch and in sea turtle stomachs

1

u/Silfei 8d ago

And that's how you lose an arm

1

u/NedWolfThe5th 8d ago

Look mommy no hand! :)